Plaza Stone

Perfect for walkways, patios, and pool decks.

Plaza Stone

A timeless paving stone with an impressionistic embossed surface profile the Plaza Stone series provides an array of pattern options. Available in many colors, choose Plaza Stone in standard or Heritage Series finish to deliver unlimited design possibilities. The 45mm and 60mm thicknesses are intended for non-vehicular traffic.

APPLICATIONS

General Road Construction • Parking Lots • Driveways • Patios • Bridge Underpasses • Entrance Areas • Flooring in Stables • Sidewalks • Terraces • Garden Pathways • Pool Decks • Pedestrian Malls • Roof Gardens

COMPOSITION AND MANUFACTURE

Plaza Stone is made from a "no slump" concrete mix. Made under extreme pressure and high frequency vibrations, Plaza Stone has a compressive strength greater than 8000psi, a water absorption maximum of 5% and will meet or exceed ASTM C-936 and freeze-thaw testing per Section 8 of ASTM C-67. Heritage Series may not comply with ASTM C-67 freeze-thaw durability.

INSTALLATION

  • 1. Excavate unsuitable, unstable or unconsolidated subgrade material and compact the area which has been cleared. Backfill and level with dense graded aggregate suitable for base material (typically 4 in. to 8 in. (101mm to 202mm) of compacted base for light vehicular and pedestrian traffic) or as otherwise directed by Site Engineer / Architect / Landscape Architect.
  • 2. Place bedding course of washed sand conforming to the grading requirements of ASTM C-33 to a uniform depth of 1-11/2in. (25-38mm) screeded to the grade and profile required.
  • 3. Install Plaza Stone with joints approximately 1/8in. (3mm).
  • 4. Where required, cut pave stones with an approved cutting device to fit accurately, neatly and without damaged edges.
  • 5. Tamp pave stones with a plate compactor, uniformly level, true to grade and free of movement.
  • 6. Spread sand to 1/8 in. (3mm) thickness over entire paving area. Heritage Series may require joint sand stabilization.
  • 7. Make one more pass with plate compactor to fill joints with sand.

Plaza Stone

Specifications and Pallet Information

Plaza Stone 6x6 (45mm)

Available Colors: Buff Charcoal, Buff Dark Brown, Old Town Blend, Silvershell Blend

Nominal Dimensions: 5 7/6" x 5 7/16"

Height/Thickness: 45mm = 1 3/4" *

Sq. Ft./Pallet: 140

Pieces/Pallet: 672

Approx. Wt./Pallet: 2,746 lbs.

Plaza Stone 6x9 (45mm)

Available Colors: Buff Charcoal, Buff Dark Brown, Old Town Blend, Silvershell Blend

Nominal Dimensions: 5 7/16" x 8 3/16"

Height/Thickness: 45mm = 1 3/4" *

Sq. Ft./Pallet: 133

Pieces/Pallet: 420

Approx. Wt./Pallet: 2,492 lbs.

Plaza Stone I Combo (60mm)

Available Colors: Charcoal, Buff Charcoal, Buff Dark Brown, Old Town Blend, Silvershell Blend

Nominal Dimensions: 5 7/16" x 5 7/16" & 5 7/16" x 8 3/16"

Height/Thickness: 60mm = 2 3/8" *

Sq. Ft./Pallet: 110

Pieces/Pallet: 420

Approx. Wt./Pallet: 3,080 lbs.

Plaza Stone Rectangle Only (60mm)

Available Colors: Charcoal, Buff Charcoal, Buff Dark Brown, Old Town Blend, Silvershell Blend

Nominal Dimensions: 5 7/16" x 8 3/16"

Height/Thickness: 60mm = 2 3/8" *

Sq. Ft./Pallet: 95

Pieces/Pallet: 300

Approx. Wt./Pallet: 2,674 lbs.

* Fractional dimensions are nominal.

 

Enter Your Address to Zoom in

Instructions

  • Find and zoom in on the desired address using the Search tool.
  • Left click on the map to start plotting points.
  • Continue clicking around the perimeter to add more points.
  • The Square Footage and Border of the area will be updated.
  • Adjust an area as needed by dragging its points.
  • More information on colors, sizes, and options are available at the Pavestone site.

    See Details at Pavestone